ISKYPOOL  โ€ข   DROP STITCH POOLS & OUTDOOR LIVING

ISKYPOOL / Articles about pools

ISKYPOOL Pool FAQ & Important Information

ISKYPOOL pool FAQ: Drop Stitch, 10 PSI, air valve, dimensions, setup, filtration, durability, repairs, storage, below-ground installation and Pro Gear Kit.

Pool scene at sunset.
ISKYPOOL ยท IMPORTANT INFORMATION

ISKYPOOL Pool FAQ
& Important Information

Answers to the most common questions about ISKYPOOL setup, air valves, operating pressure, filtration, dimensions, durability, repair and seasonal storage.

ISKYPOOL swimming pools use Drop Stitch technology. The high-pressure wall becomes rigid without requiring a traditional external metal frame.

OPERATING PRESSURE
10 PSI
SETUP
8โ€“25 min
STRUCTURE
No external frame
TECHNOLOGY
Drop Stitch + PVC
Air valve and pressure loss

Is the air valve leaking?

Do not immediately assume the pool is defective. After transportation and the first inflation cycles, the valve body may require a tightening check.

Correct procedure:

1. With the pool fully deflated, check and tighten the valve body using the supplied valve wrench.
2. Inflate the pool to 10 PSI.
3. Check the valve again and carefully adjust it if required.
4. Check it once more after approximately 2โ€“3 days.

Continued significant pressure loss after these checks means the actual source should be investigated rather than repeatedly tightening the valve.

How should an ISKYPOOL pool be inflated?

ISKYPOOL Drop Stitch walls are designed for an operating pressure of 10 PSI.

Conventional low-pressure blowers can move a large volume of air quickly, but are generally not designed to reach this level of pressure.

The practical solution is a high-pressure electric SUP compressor, such as the battery-powered ISKYPOOL HT-790.

A manual pump can technically generate high pressure, but inflating a full-size swimming pool this way requires considerable physical effort.

Filtration connections and small leaks

Why can the filtration connection leak?

The filtration connection is a threaded fitting. ISKYPOOL pools use standard connections, including a 1ยฝ-inch thread.

If a connection leaks, first make sure the plug or adapter is installed straight, the thread is not cross-threaded and the connection has been sealed correctly. Appropriate PTFE thread-sealing tape may be used where specified in the instructions.

Depending on the filtration system, an appropriate adapter may be required for common hose sizes such as 32 or 38 mm.

Pool dimensions and packaging labels

Is the stated size internal or external?

A pool has two different measurements: its external overall size and its internal usable size. The internal diameter is smaller because of the wall thickness.

Some production-batch packaging may display the internal pool dimension. When choosing a model, use the specifications shown on the current official product page.

When in doubt, measure the inflated pool across its external edge and compare it with the current model specification.

Setup and site preparation

Setting up the main ISKYPOOL pool structure typically takes approximately 8โ€“25 minutes, depending on model size and conditions. Site preparation, additional equipment and filling time are separate.

The base should be stable, sufficiently level, clean and practical for the individual installation.

How to set up ISKYPOOL How to prepare the site
Can an ISKYPOOL pool be installed below ground?

A partially or fully below-ground project is technically possible. However, ISKYPOOL does not recommend placing the pool directly against surrounding soil.

Direct burial introduces additional risks:

โ€ข soil pressure after the pool is drained;
โ€ข groundwater and rainwater around the structure;
โ€ข soil movement and abrasive contact;
โ€ข restricted inspection and repair access;
โ€ข hidden damage and rodents.

If below-ground placement is required, a separate retaining and drainage structure should isolate the pool from surrounding soil. The pool itself should not act as a retaining wall.

Read the full site guide
Durability, sitting on the wall, pets and repairs

Can you sit on the pool wall?

A correctly inflated Drop Stitch wall is very rigid and can be sat or leaned on during normal use. Avoid jumping on the wall or creating impact loads.

Can dog or cat claws damage the pool?

Reinforced PVC is durable in normal use, but deliberate contact with sharp claws, teeth or other sharp objects can damage its surface.

Can a puncture be repaired?

Yes. Many localized punctures and small PVC damages can be repaired using suitable PVC repair materials and methods. ISKYPOOL pools include a repair kit in the standard package.

Does the pool need constant reinflation?

With a properly secured valve and no damage, frequent reinflation should not be normal. Air pressure can change slightly with temperature: cooler air lowers pressure and warmer air increases it.

Water care and seasonal storage

How should the pool water be maintained?

Use suitable swimming-pool chemicals according to their manufacturer's instructions and maintain regular circulation and filtration.

How should the pool be prepared for long-term storage?

1. Drain the pool completely.
2. Thoroughly rinse away pool chemicals, body oils, organic contamination and dirt.
3. Dry the pool completely, including folds and difficult areas.
4. Only then deflate and fold it.
5. Store it clean and dry in suitable conditions.
Never store the pool while it is wet.

Moisture and organic contamination trapped for months inside a folded pool can lead to odors, mold and surface damage.

What is included with the pool?

The standard package for current ISKYPOOL pools includes:

Swimming pool
Shipping box
Storage bag
Soft protective pool cover
2 hoses
2 adapters
Repair kit
Air-valve wrench
Instruction manual

The exact package for a specific product or market should always be confirmed on the current official product page.

What is the ISKYPOOL Pro Gear Kit?

Pro Gear Kit is designed to provide practical equipment for operating a full-size ISKYPOOL, rather than simply adding more items to the box.

High-pressure electric compressor
For quick inflation to 10 PSI.
Sand filtration system
Flow rate up to 8,705 L/h.
127 cm reinforced ladder
Rated for loads up to 150 kg.
Filter media
For use with the filtration system.

Appearance and individual components may vary by production batch and market. Always check the current regional product page.

Can a pool heat pump be connected?

Yes. A compatible pool heat pump or other suitable water-heating equipment can be integrated into the circulation system. The exact connection arrangement depends on the equipment being used.

Why buy ISKYPOOL through an official channel?

An official sales channel provides verified product origin, the correct market specification, documentation and access to regional ISKYPOOL support.

Warranty terms, logistics and support arrangements vary by country. Always check the official regional seller page for the conditions applicable to your market.

What should I do if something seems wrong?

Most common questions are already covered in this page, the manuals and the video guides.

If your situation is unusual or something appears defective, do not rush to return the product. Contact the seller through the support chat and describe the issue.

Where possible, include a photo or video and the product serial number. This helps the support team diagnose the issue much faster.

Need step-by-step instructions?
Watch ISKYPOOL video guides covering pool setup, filtration, air valves, skimmers and other equipment.
Watch ISKYPOOL video guides

โ† Back to all guides